Viper 1-Way Car Starter
This is a Great Deal on the Worlds Best Selling Remote Start Brand
Viper Remote Car Starters see why Viper is the Worlds best selling remote start system we have some of the best INSTALLED pricing in the Durham Region - Pickering, Ajax, Whitby, Oshawa and Clarington - We give reliable accurate up front quotes that never change we guarantee your quote for 3 months - know before you book what your guaranteed full installed price will be call or text Mick at (905) 718-1212 or Tracey at (905) 391-0896
Remote Starter Features Overview:
The Viper Model DS4-1W Remote Start and Keyless Entry system can start your car from a distance of up to a quarter of a mile away, and run it by remote control for a pre-set amount of time. It also functions as a keyless entry system, remotely locking and unlocking your vehicle's power door locks. The fully installed price is $375 (no extra charges -EVER) this includes the remote start and keyless entry features the warranty is 5 years
Remote Controls: The DS4-1W comes with two 9146V remote controls. To prevent cloning and code-grabbing, the remotes feature 66-bit encryption. Each remote is powered by two CR2016 batteries, and has four command buttons:
Remote Starting: Pressing the (*) button on the remote for a second will remotely start the vehicle and run it for 12 minutes. If desired, you can change the run time to 24 minutes or 60 minutes. If you wish to pre-heat or pre-cool the vehicle, you must preset the climate controls prior to starting the vehicle. When you are ready to drive the remotely-started vehicle, insert the ignition key, turn it to the On position (not Start), and press the brake pedal.
Crank Time: If the unit is programmed for no engine checking or voltage sense, the crank time must be set to the appropriate duration. The default setting is 0.6 seconds. It can be lengthened to 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, or 4.0 seconds. Diesel "Wait To Start" Timer: If you have a diesel vehicle, you can set the starter to delay by a few seconds before engaging. The "wait-to-start" duration can be set to 15, 30, or 45 seconds. Gasoline engines will start approximately 4 seconds after the system acknowledges the start command by flashing the parking lights.
Valet Takeover: This feature allows the vehicle to remain running after the key has been removed from the ignition. This is useful for those occasions when you wish to exit and lock the vehicle for short periods of time while leaving the motor running and the climate controls on.
Automatic Shut-down/Starter Lockout: After the vehicle is remote-started, the remote starter will shut down when the brake pedal is pressed, the hood is opened, if the run time expires, or when the remote start command is sent again from a remote control. In addition, if the hood is opened or if the brake pedal is pressed, you cannot start the vehicle using the remote starter.
Timer Mode: The Model DS4-1W can be programmed to start and run the engine every three hours, for a maximum of six cycles. The engine will run for the programmed run time and then shut down. After three hours, the system will restart the engine. The Timer Mode works only when the system has been locked with the remote.
Pit Stop Mode: The Pit Stop mode can keep the engine running during short trips away from the vehicle. This lets you turn off the ignition and remove the key while the engine is running, so you can exit the vehicle. While in Pit Stop mode, the engine will run for the programmed duration.
Anti-grind Circuitry: Whenever the vehicle is started using the remote, advanced anti-grind circuitry prevents the starter from being engaged using the key. (In other words, it won't let you try to start the car with the key if the remote starter has already been engaged.) This prevents damage to the starter motor. The optional Failsafe Starter Kill relay must be installed in order for the anti-grind circuitry to work.
Garage Mode: The Garage Mode is a safety feature that disables the remote start system if the vehicle is parked in a garage, being serviced, or used by someone unfamiliar with remote start systems. Any attempt to start the engine, activate the Timer Mode, or enter the Pit Stop mode will be denied when Garage Mode is activated.
SmartStart Compatible: A Viper SmartStart module can be added to the Model DS4-1W , allowing you to operate specific functions of the remote start/keyless entry system from your smartphone on the SmartStart app. The app is compatible with iOS devices (requires iOS 9.0 or later) and Android devices (requires Android 4.3 and up)
.
Keyless Entry Features: Locking/Unlocking The Vehicle: Each 7146V remote control has separate "Lock" and "Unlock" buttons. When the "Lock" button is pressed, the doors lock, the horn in the vehicle honks once and the parking lights flash once. When the "Unlock" button is pressed, the doors unlock, the horn honks twice, and the parking lights flash. In the Silent mode, the doors lock/unlock without the horn honks, and the parking lights flash to confirm the operation.
Trunk Release: When connected, the accessory output can operate a factory power release for the vehicle's trunk or hatch. An optional relay may be needed, and if the factory release is not power-activated, a trunk release solenoid can often be added (Directed part # 522T).
Car Finder: If you're having difficulty finding your vehicle in a crowded parking lot, the car finder function will cause the lights to flash 5 times slowly, allowing you to locate your vehicle.
Panic Mode: If you are threatened in or near your vehicle, you can attract attention by triggering the system with your remote. Panic mode requires the horn honk circuit to be connected.
The Viper Model DS4-1W Remote Start and Keyless Entry system can start your car from a distance of up to a quarter of a mile away, and run it by remote control for a pre-set amount of time. It also functions as a keyless entry system, remotely locking and unlocking your vehicle's power door locks. The fully installed price is $375 (no extra charges -EVER) this includes the remote start and keyless entry features the warranty is 5 years
Remote Controls: The DS4-1W comes with two 9146V remote controls. To prevent cloning and code-grabbing, the remotes feature 66-bit encryption. Each remote is powered by two CR2016 batteries, and has four command buttons:
- Lock: Pressing this button for one second locks the vehicle doors. When held for approximately two seconds, the Panic Mode is activated.
- Unlock: This button will unlock the doors when pressed for one second. It can also be used to turn off the Panic Mode.
- Remote Start: Pressing this button for one second activates the remote start function of your system.
- AUX: The AUX button, located on the side of the remote, can activate the Silent Mode (press for less than one second before locking or unlocking), or an optional auxiliary function. Pressing and holding the AUX button for approximately two seconds activates an auxiliary function, such as trunk release.
- Combinations: Additional functions can be triggered by pressings remote buttons in combination:
- Remote Start + AUX: Car Finder
- Lock + Remote Start + AUX: Rear window defogger
- Lock + Unlock: Timer Mode
Remote Starting: Pressing the (*) button on the remote for a second will remotely start the vehicle and run it for 12 minutes. If desired, you can change the run time to 24 minutes or 60 minutes. If you wish to pre-heat or pre-cool the vehicle, you must preset the climate controls prior to starting the vehicle. When you are ready to drive the remotely-started vehicle, insert the ignition key, turn it to the On position (not Start), and press the brake pedal.
Crank Time: If the unit is programmed for no engine checking or voltage sense, the crank time must be set to the appropriate duration. The default setting is 0.6 seconds. It can be lengthened to 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, or 4.0 seconds. Diesel "Wait To Start" Timer: If you have a diesel vehicle, you can set the starter to delay by a few seconds before engaging. The "wait-to-start" duration can be set to 15, 30, or 45 seconds. Gasoline engines will start approximately 4 seconds after the system acknowledges the start command by flashing the parking lights.
Valet Takeover: This feature allows the vehicle to remain running after the key has been removed from the ignition. This is useful for those occasions when you wish to exit and lock the vehicle for short periods of time while leaving the motor running and the climate controls on.
Automatic Shut-down/Starter Lockout: After the vehicle is remote-started, the remote starter will shut down when the brake pedal is pressed, the hood is opened, if the run time expires, or when the remote start command is sent again from a remote control. In addition, if the hood is opened or if the brake pedal is pressed, you cannot start the vehicle using the remote starter.
Timer Mode: The Model DS4-1W can be programmed to start and run the engine every three hours, for a maximum of six cycles. The engine will run for the programmed run time and then shut down. After three hours, the system will restart the engine. The Timer Mode works only when the system has been locked with the remote.
Pit Stop Mode: The Pit Stop mode can keep the engine running during short trips away from the vehicle. This lets you turn off the ignition and remove the key while the engine is running, so you can exit the vehicle. While in Pit Stop mode, the engine will run for the programmed duration.
Anti-grind Circuitry: Whenever the vehicle is started using the remote, advanced anti-grind circuitry prevents the starter from being engaged using the key. (In other words, it won't let you try to start the car with the key if the remote starter has already been engaged.) This prevents damage to the starter motor. The optional Failsafe Starter Kill relay must be installed in order for the anti-grind circuitry to work.
Garage Mode: The Garage Mode is a safety feature that disables the remote start system if the vehicle is parked in a garage, being serviced, or used by someone unfamiliar with remote start systems. Any attempt to start the engine, activate the Timer Mode, or enter the Pit Stop mode will be denied when Garage Mode is activated.
SmartStart Compatible: A Viper SmartStart module can be added to the Model DS4-1W , allowing you to operate specific functions of the remote start/keyless entry system from your smartphone on the SmartStart app. The app is compatible with iOS devices (requires iOS 9.0 or later) and Android devices (requires Android 4.3 and up)
.
Keyless Entry Features: Locking/Unlocking The Vehicle: Each 7146V remote control has separate "Lock" and "Unlock" buttons. When the "Lock" button is pressed, the doors lock, the horn in the vehicle honks once and the parking lights flash once. When the "Unlock" button is pressed, the doors unlock, the horn honks twice, and the parking lights flash. In the Silent mode, the doors lock/unlock without the horn honks, and the parking lights flash to confirm the operation.
Trunk Release: When connected, the accessory output can operate a factory power release for the vehicle's trunk or hatch. An optional relay may be needed, and if the factory release is not power-activated, a trunk release solenoid can often be added (Directed part # 522T).
Car Finder: If you're having difficulty finding your vehicle in a crowded parking lot, the car finder function will cause the lights to flash 5 times slowly, allowing you to locate your vehicle.
Panic Mode: If you are threatened in or near your vehicle, you can attract attention by triggering the system with your remote. Panic mode requires the horn honk circuit to be connected.
What's in the box:
|
This is the Viper DS4 Remote Start Module (The Systems Brain)
|
Book It Now - Here's How it Works
We have been installing Remote Car Starters since 1997 text or call 9053910896 or 9057181212 to set up a next day installation here is what to expect
We have been installing Remote Car Starters since 1997 text or call 9053910896 or 9057181212 to set up a next day installation here is what to expect
- Call or text 9053910896 or 9057181212 we will schedule the installation
- Installations can be next day
- Installations can be done at our Whitby shop or at your Home/Work (no extra charge for OnSite installation)
- Installations take around 2 hours the shop has a waiting area
- Payment Credit/Debit/Cash - No extra charges - ever. The price you are quoted is the only price you will pay
- 3 Year Warranty ALL Parts and Labour
Product Support